Maintenance and maintenance methods of fast measuring instrument :
1. The LED light source of the rapid measuring instrument has a long service life, but when the bulb is burned out, do not disassemble it randomly, it needs to be replaced by a professional.
2. The rapid measuring instrument should be placed in a clean and dry room (room temperature 20 ℃ ± 5 ℃, humidity below 60%) to avoid surface contamination of optical parts and rust of metal parts (this is for iron, Kunshan Lindi is Marble is relatively better), dust and debris fall into the motion guide, affecting the function of the instrument.
3. The transmission mechanism and motion guide of the instrument should be regularly lubricated to make the mechanism move smoothly and maintain a good working condition.
4. It has precision components, such as the imaging system, table, scale, and Z-axis transmission mechanism, etc. All need to be fine-tuned. All adjustment screws and fastening screws have been fixed. Customers should not disassemble them by themselves. Please inform us if you have any questions. Professionals, if you disassemble it by yourself, it will cause the image measuring instrument to malfunction or reduce the accuracy, which is not covered by the warranty.
5. Generally all electrical connectors of the rapid measuring instrument should not be removed. If it has been removed, it must be correctly inserted and tightened according to the mark. Improper connection will affect the function of the instrument and may damage the system in serious cases.
6. The measurement software on the computer has accurately compensated the error between the workbench and the optical ruler. Do not change it by yourself, otherwise it will produce wrong measurement results.
7. If the workbench glass and paint surface are dirty, you can wipe it with neutral detergent and water. Never use organic solvents to wipe the paint surface, otherwise the paint surface will lose its luster.
8. After using the rapid measuring instrument, the working surface should be wiped clean at any time, and it is best to put on a dust cover.
Fast measuring instruments are widely used in various neighborhoods in industrial production, such as mold testing, gear testing, tool testing, and friction testing, etc., to protect the safety of the production. It is one of the necessary testing equipments for universities, research institutes and metrological verification departments, laboratories and production workshops. Before using the fast measuring instrument for industrial inspection, we must first ensure that the secondary image measuring instrument can operate normally, which requires us to understand the structure and installation of the fast measuring instrument.
1. When removing the outer packaging and inner packaging of the rapid measuring instrument, you need to take out the instruction manual, read and check it carefully
2. Move the quick measuring instrument to a flat and positionable table, install the foot screws, and level it with a level instrument. After this step is completed, the basic frame of the secondary image measuring instrument is completed.
3. Take X, Y, Z, shaft fixing plate, Z-axis slide block fixing screws (on the slide block in the camera), X, Y, Z axis can be driven.
4. The power supply of this machine can be connected to the monitor and connected to the power supply of the instrument, and the quick measuring instrument is installed. Switching on the power of the two-dimensional image measuring instrument is not the same as the first step. However, if it cannot be completed, the fast measuring instrument cannot be started, so all the previous work is useless.
- Measuring the configuration of the projector
- Introduction projector second element
- Fast measuring instrument maintenance mode
- Advantage of portable coordinate measuring instrument which
- CMM routine maintenance mode
- 3D optical image measuring instrument of neighborhood
- To establish a method Coordinate Measuring Machine coordinate system
- Length measuring instrument basics
- Portable coordinate measuring machine using the method
- Length measuring method is used
- Measurement method and working principle of two-dimensional image measuring instrument